Jun21

A closer look at industrial air hose fittings

by admin on June 21st, 2011 at 6:44 pm
Posted In: Air Tools

There are different kinds of air hoses around and this means that one would have to first determine his or her needs before ever choosing the appropriate one. There are domestic ones as well the industrial air hoses available for you to choose from. This means that you would as well get the industrial air hose fittings especially that of the industrial air hose reel. When it comes to finding the right one for your use, it takes a lot of special concern with the factors that come into play.

There are different kinds of materials that are used in the process of producing these fittings. There are those that make use of the water or compressed hydraulic fluid which plays a crucial part in the kind of reel you get. The fact of the matter is that when it comes to these hose reels, you would get several benefits. This however depends on the kind of tasks to be performed. For instance for those who choose to buy a simple plastic hose reel that would be used for only the garden at home, it would not be good for the industrial environment. It is important to note the fact that the industrial air hose fittings come with special attributes that make them very much ideal for any kind of industrial settings.

When choosing an industrial air hose fitting you would want a fitting that is designed to carry the contents you are working with as well the kind of hose you are making use of.  Welding hose fittings with the reels for instance are able to mount more than one kind of hose as is required for working with oxy-acetylene.  Industrial hose fittings on the contrary are designed for under pressure contents and as such must stop surplus kinking or bending of the hoses while they are on the reel or while they are retracted. The fact of the matter is that you cannot therefore use the fittings fashioned out for the industrial work for any kind of home usage. This would mean putting square pegs in round holes as you would get the necessary performance desired. This also means that one has to go all out in ensuring the safety of the air hose fittings anytime they are installed for usage.

One of things you have to always be on the lookout is the type of environment that you are going to use the industrial air hose fittings. You may want to ensure that the industrial air hose reel for instance is produced or made of a good strong material so that they could work very well over its time of usage. You would get varieties to choose from like the plastic, stainless steel and metal fittings are in a bid to make your air hose work very well. Make sure that you choose a very good company or shop when it comes to purchasing your kind of fittings.

└ Tags: , , , , ,
Jun10

Tool Parts

by admin on June 10th, 2011 at 7:33 pm
Posted In: Air Tools, Tools

One of the major issues with air tools users is whether to repair or replace an air tool, this is a problem that has led to a variety of practices. Most companies in the construction industry write off their tools after a five year period, but lots of users find it hard to throw their air tools away after five years thus it’s not rare to find tools that have been working for over ten years. The older the air tool the lower the efficiency and moreover it doesn’t have improvements in technology. In surveys it has been said that tools that are working with efficiency lower than 90% is actually costing the user money. The period of five years normally applies to companies where the air tool is used regularly, but in homes where the tool is used once in a while, the durability of the tool can be as high as over fifty years but only if it is maintained well.

When one thinks of repairing air tools the repair man is usually trained to access the costs of replacing the tools rather than repairing it. In most companies repairing is done by the maintenance department, and depending on the policy it might be beneficial to the company or lead to its down fall. It is advised that one replaces air tools is the cost of repairs is above 50% the cost of a new one. For personal tools the repairman must be hired and thus one should enquire the repair parts cost rather than the repair fee when thinking of buying new tools.

Having spare parts and tools in a firm is encouraged since the losses that are experienced if a tool breaks up are usually high. But when one is dealing with air tools that have removable parts one should consider having spare parts of the tool, if a part happens to break down the presence of a replacement is quite advantageous to the worker. In replacing damaged parts one should have a guide that directs one on how to do the replacement, some of the home devices replacements can be easily done by searching for tips over the internet, but when one is dealing with complicated tools it is advised that one enlists the services of an expert. If ones tools are complicated and one has knowledge on working with the tool one can simply conduct the replacements with ease.

The number of spare parts that one should have depends on the use of the air tool. If the tool is used regularly then one can store about two to three parts, but depending on the frequency of damage on the tool parts. In cases of air tools such as of the drill, due to the high power small drill bits might be prone to damage as opposed to the larger drill bits thus the replacement parts need to be  more in number. Replacement parts are usually of the movable parts and the working parts that are often exposed to forces such as friction.

└ Tags: , , , ,
Jun03

The Air Grinder

by admin on June 3rd, 2011 at 7:08 pm
Posted In: Air Tools, Tools

You would certainly come across a number of tools and equipment in the working shop. However one of the most fascinating of these is that of the air grinder. This is known to be a very strong hand held tool that can be used in a number of ways in the mechanical and metal shop. This machine makes use of compressed air in order to power it. Indeed the power would rise and the pressure would also build up to the preset limit as this takes place.

The fact of the matter is that this machine with the air it uses has to be dried in order to prevent any kind of moisture from getting to the working mechanisms. However all of the metal surfaces that would get into contact with another metal surface would have to be lubricated. Therefore there is the addition of oil to the air supply or grinder in order to avoid any kind of premature wear of the machine. When it comes to the application of power the air grinder could be very much advantageous. This is because a number of them come with a second handle which is quite closer to the grinding disc or cutting edge to offer more pressure. This is normally at the back of a safety guard in order to prevent injury from flying sparks and the hand slipping off the handle of the tool. Surely the air grinder is one of the finest of grinders you would ever come across.

When it comes to the usage of the air grinder it is very crucial that you undertake some safety precautions. This is to ensure that you do not get yourself injured in the process of usage at all. For your safety precautions it is important that you make use of heavy gloves in order to protect your hands. Moreover there should be the usage of safety glasses to avoid any kind of injury to the eyes from flying debris at all. It would interest you to note that the rotation of the disc on this grinder would be very high in terms of rpm’s for it to work very well. One of the most forgotten of all the personal protective tools is the ear plugs. This is because the machine is able to create noise levels to more than 100 decibels such that this can damage your ear. What this means is that the ear plugs is very much highly recommended during usage of the air grinder.  There are some folks who would prefer to wear a chain in order to keep the grinder next to them. However there are some of the reviews that claim that keeping a chain over the item would only lead to choking the operator.

This machine is very nicely built and also very easy to maintain during usage. Proper maintenance would ensure that the machine is able to last long for your purposes and needs.

└ Tags: , , ,
May24

A closer look at the POP Riveter

by admin on May 24th, 2011 at 9:09 am
Posted In: Air Tools, Tools

In this world that is always changing and on the move, people are always facing a lot of challenges when it comes to choosing the best of assembly components and systems. The fact of the matter is that you would never come across the finest of tools like the pop riveter. You should know that people from all over the world are interested in getting this tool for various works. With such a huge demand for this item it is important that we take a closer look at the issues that surround it.

It would interest you to know that the pop riveter offers the best of services you can ever dream of. This is an offer that includes a very extensive range of rivet body styles, technology driven custom rivet capabilities, rivet materials and the best of specialized finishes. This one would be in the range from the 2mm micro rivets to the ¼ structural rivets. The good thing is that this riveter would go on to meet the purposes and needs of the vital markets that it serves with the finest of high performances and quality products to finish off.

The great thing about the pop riveter is that it comes with a set of manual tools that are very powerful and strong enough to take you all installation processes. It would be very helpful in the workings of automated installation systems thereby offering a total solution to minimize your entire installation costs. This tool is very much appropriate for all kinds of industries like transportation, energy, electronics, appliance, construction and automotive markets. In terms of installation it would be good to ensure that you go in for a good technician so that your property lasts longer.

This pop riveter is very much good in all kinds of work you want to do. It comes with a head on each end of an installed rivet meaning that it is able to support tension loads. But it is very much able to support shear loads because the bolts and screws are very much perfect for the tension applications. If you are not aware this tool is a special kind of brand name for the blind rivets that are sold by Emhart Technologies. It is indeed very special as it comes with non-locking mandrels but cannot be used for vital structural joints since the mandrels could fall out because of the vibration. Moreover when you consider the mandrel, they are very much more liable to failure from vibration and corrosion.

When you compare the pop riveter to the solid rivets, they can be completely inserted and installed in a joint from just one side of a structure or part. These rivets are very much useful when access to the joint is just available from only one side. It is put in a pre-drilled hole and then set by pulling the mandrel head into the rivet body. The sizes may vary depending on the use it is applied for.

└ Tags: , , , ,
May11

Air tools compressor care and use

by admin on May 11th, 2011 at 7:33 pm
Posted In: Air Tools

When one is using the air tools one need to know how to use the equipment involved ensuring that one gets the best results of working with the tools. One might think that it is quite easy to work with the tools since they are lighter than other power driven tools, but they have complications when it comes to use due to their supportive accessories which they cannot work with.

The first accessory that every tool requires is the compressor. The compressors are available in different rating and are sold separately thus making it necessary for one to know the type of compressor that one needs to buy for their air tools. The first thing that one is required to look into is the rating of the compressor, one of the reasons why the use of the tools is complicated. The air compressor that one is to use is required to be compatible with the tool, in both pressure rating that is often done in pressure per square inch (PSI). Over or under shooting the rating of the tool will result to unwanted results such as over powering the tool for the higher rating making operation quite tough and for lower rating the efficiency of the tool will lower.

One also needs to choose the fuel of the compressor. Unlike the tools the compressor requires power from another source to compress the air, mostly the construction tools use petroleum based fuel to compress the air. Thus in comparison to electric tools the system pollutes more. The use of the fuel needs the presence of internal combustion engines which makes lots of noise in operation, proportionally to the air tools power involved. If the compressor uses electricity, it becomes less pollutant but has the problem of overheating and thus the engineering aspect of the compressor presents lots of energy waste.

In working the compressors usually require very little maintenance on daily basis. One should make sure that the outlet that is feeding the compressor is able to supply the load that the compressor requires for effective working. One is also required to drain the air in the compressor after use. The device is fitted with release valves that are located at the bottom of the compressor tank; they are opened up to release the air in the accessory and any condensation that might be in the tank. Lubrication of the compressor is also required to keep the working parts of the compressor in shape; one should consult the air tools manufacturer for the proper lubrication procedure and lubricants to use.

When it comes to storage one must make sure that the air tools compressor is shielded from external forces that might cause it damage. water and moisture is one of the most destructive forces that a compressor should be kept away from, it causes both rust and cavitations when it enters the system of the compressor and air tools, furthermore it lowers the efficiency of the air supply. One should keep the compressor in a cool and dry place that is free of any dirt. Dust is also another impurity that will cause a grinding effect on the moving parts and thus should be avoided.

└ Tags: , , , ,